
“R means resistance to heat flow. The higher the R-value, the greater the insulating power.” “To get the marked R-Value, it is essential that this insulation be
installed properly. If you do it yourself, get instructions and follow them carefully. Instructions do not come with this package.” To obtain installation instructions
visit www.low-e.com or call 1-800-289-5693. Like a radiant barrier, Low-E products also block 97% of radiant heat.
NOTE: Do not allow product to become damp or wet while rolled in sealed bag
Do not set product directly on wet or uncured concrete.
®
WARNING: Although ESP LOW-E Insulation Products are all fire tested to ASTM and/or NFPA standards; it is
recommended that they or any insulation material should not be exposed to open flame or other
ignition sources of sufficient intensity during shipment, storage or installation.
CAUTION: Aluminum is an electrical conductor. Please use caution when working around electrical sources
including overhead power lines. Carefully inspect electrical junction boxes and check for frayed
wires before beginning installation
®
Note: ESP Econo-E is a versatile product for many applications and industries.
®
ESP LOW-E : ECONO-E INSULATION
PRODUCT CODES*: 4EFET, 6EFET(trimmed), 4EFES, 6EFES(staple flange), 4EFEZ, 6EFEZ(ez seal)
PRODUCT DIMENSIONS & DESCRIPTION*
Double sided scrimless aluminum foil laminated to polyethylene foam (1/4” nominal thickness)
Edges can be trimmed, with staple flange or with EZ-Seal self taped flange feature.
WIDTH**: 4’, 6’ respectively
LENGTH**: 125’ (stock size 4’width) 84’ (stock size 6’ width)
R-Value*** : R-11 down R-7.55 up R-7.75 horizontal
PERM RATING: ASTM E-96 0.008
FLAME AND SMOKE: ASTM E-84 Flame spread <25 Smoke developed <50
FULL SCALE FIRE TEST: NFPA-286 Passed
EMITTANCE: ASTM C-1371 0.03
®
* This label refers to the Econo-E line of insulation products supplied by ESP, Inc. and includes information on different widths and
®
attachment features of the Econo-E line. Refer to thermal label affixed to the roll of insulation for information on specific product purchased.
** Additional widths and lengths are available upon request and approval by ESP, Inc.
®
*** R-value results are obtained from ASTM C236. R-values for Econo-E materials can be higher or lower depending upon application.
Specific R-values for specific applications can be obtained from Install Guide at www.low-e.com or by contacting ESP , Inc. at 1-800-289-5693
®
Environmentally Safe Products, Inc.
313 W. Golden Ln. New Oxford, PA 17350
Toll Free: 1-800-289-5693 Fax: 717-624-7089
®
Econo-E Insulation
Reduces your carbon footprint.
E
S
P
®
Scan code to see
Install Guide
ESP, Inc. strives to provide the most accurate R-Value data possible.
The R-Values set forth in this document are the reflection of a
combination of industry standard testing and conscientious calculations.
However, these numbers, even within specific applications can
fluctuate due to the multiple variables that influence R-Values.
copyright©espaug1.2012
13.
YOUR EVERYDAY INSULATION SOLUTION
Komentáře k této Příručce